CURRENT PRODUCTS

Welcome to ASL! We offer a range of high-quality products for various industries.  With 22 years of experience in the Electrostatic Filtration Systems industry, we have the knowledge and resources to produce and deliver top-notch products for our customers. Thank you for considering us for your oil filtration machinery and parts needs. Please don’t hesitate to contact us for more information about our products and services. For previous products click here.

Current Products

S-Series

FPRS-S30 Cabinet

FPRS-S40-CAB

FPRS-S40 Cabinet

FPRS-S40-CAB
The “S” Series Cabinet Units add several maintenance and operation features to the already proven E-Series Systems. Automatic back-flush warning, over pressure shutdown, Low voltage shutdown, internal drip tray with float switch shutdown, and remote alarm provisions. Featuring easy to operate and maintain controls and indicators, the S-Series is our most popular System. Like their E-series cousins, the S-Series systems are the same physical size, and have the same power requirements. As the S-series uses the same Electrostatic Cell and water absorber, it has the ability to provide finite fluid filtration for up to one year of continuous operation without maintenance or operator intervention. Imagine ultra clean (ISO 10/7/0) fluid filtration for just 4 CENTS per operating hour cost, and an initial purchase price that’s more often than not, less than the cost of the fluid in your reservoir! 

FPRS-80-SBO

FPRS-80-SBO
FPRS-80-SBO
The 80 SBO is designed for reservoirs up to 2800 gallons, and uses similar components as other ASL Systems. Standing 46″ tall, 40″ wide, and 15″ deep, the 80-SBO units weigh 300 lbs. and, like other ASL systems, provide up to one year of 24/7 operation without operator intervention or maintenance.

FPRS-S200

FPRS-S200-ABH
FPRS-S200-ABH
The FPRS-S200 is designed for larger (up to 7000 gallon) reservoirs, and uses similar components as other ASL Systems. Standing 36″ tall, 36″ wide, and 36″ deep, the FPRS-S200 units weigh 650 lbs. and, like other ASL systems, provide up to one year of 24/7 operation without operator intervention or maintenance. 

E-Series

FPRS-E30 Cabinet

FPRS-E30-CAB

FPRS-E40 Cabinet

FPRS-E30-CAB

The E-Series Cabinet Units provide the “best bang” for the buck, of any off-line fluid filtration System, period. These “no frills” systems are sized to handle reservoirs in the 1300 gallon and smaller range. Operating on 120VAC, 50 or 60 Hz, single phase power, these systems draw less than 10 Amps. Small in size, (27″ tall, 19″ wide, 15″ deep) Big on cleaning power, these systems can provide ISO codes in the 10/7/0 range for up to a year (8760 operating hours) without maintenance or operator intervention. Sub-Micronic particulate removal, prevention and removal of Tars and Varnishes, PLUS water removal, at just 4 CENTS per hour operating cost. (Plus electricity cost)

Previous Products

While ASL no longer manufactures the following systems, we still support them with parts and service, as well as phone and email tech support, and we will be glad to help keep your system running at its best to keep your fluid as clean as possible!

FPRS-40-ABH

FPRS-80-ABH
FPRS-40-ABH
40 GPH flow rate, for 1000 gallon reservoirs and smaller. Similar to other 40 GPH units, but 2-wheel cart mounted.
22″ wide, 47″ tall, 22″ deep overall.
Manufacture of this unit ceased in 1998, replaced by the FPRS-S40 Cab, which is available on wheels or rubber feet.
Used “Demonstrator” units available in limited quantities.
All service and repair parts still available.

FPRS-80-ABH

FPRS-80-ABH
FPRS-80-ABH

80 GPH flow rate for 2000 gallon and smaller reservoirs. Similar to the 40 ABH unit above, but contains 2 Electrostatic Cells.
22″ wide, 47″ tall, 32″ deep overall.
Manufacture of this unit ceased in 1998, replaced by the FPRS 80-SBO. which is available on wheels or rubber feet.
Used “Demonstrator” units available in limited quantities.
All service and repair parts still available.

FPRS-40-SBO

FPRS-40-SBO
40 GPH flow rate, Reservoirs 1000 gallons and smaller. Standard Bolt On unit. Components mounted on a 40″ wide by 30″ tall 10 gauge back plane
Manufacture of this unit ceased in 2002, replaced by the FPRS-S40-Cabinet unit.
All service and repair parts still available.